Christmas Lights Archive

Vintage Christmas Lights Features

Plugs

Right up until the mid-1990s, most electrical items in the UK were routinely supplied without a mains plug. Anybody buying a set of Christmas lights would have to purchase a plug separately and get it fitted before they could use the set. Typically this was tackled as a DIY job, although shops often offered plug fitting as a service.

The lack of fitted plugs was a historical quirk relating to the rollout of mains wiring in the UK. Modern 'BS1363' sockets with rectangular pins were introduced in 1947 – but many homes would already have been fitted with one of several different older designs by this time. With no requirement for homeowners to upgrade to the new standard, older types of sockets remained in use for many years. In the years that followed, the variety of different sockets in use meant that it was simply more practical for customers to fit whichever type of plug suited their home than it was for manufacturers to supply a plug that would only suit some households.

While the new-style British sockets had become near-universal by the 1980s, pre-fitted plugs still remained a rarity. However, requiring people to fit their own plugs with no training was increasingly recognised as a hazard, with a 1992 debate in Parliament claiming there were approximately 2,000 related injuries per year. Legislation was duly introduced in 1994 which phased in a requirement for plugs to be pre-fitted to domestic electrical equipment over the following 2 years. Many Christmas light sets started being supplied with fitted plugs earlier in anticipation of the law change. Woolworths' range seems to have gained plugs in 1993, for example. At least one manufacturer also had a brief transitional period of supplying sets with non-fitted plugs in the box ready for the customer to attach.

A BC adapter on a Pifco light set

A bayonet cap adapter

One other oddity that lasted into the 1970s was the use of bayonet cap adapters instead of standard plugs. Some manufacturers (including Pifco) supplied Christmas lights with a small adapter plug designed to fit a standard household lampholder. A householder could therefore power their Christmas lights by plugging them into a convenient light fitting – either by removing a light bulb entirely, or by using an adapter that allowed both bulb and light set to be connected into the same lampholder.

The benefit of the bayonet adapter was two-fold. Firstly, many homes had multiple usable light fittings but very few wall sockets – it was common for some rooms to have no sockets at all. Secondly, while wall sockets varied from house to house the bayonet lampholder was in near-universal use, which gave the purchaser of a set of lights a much higher chance of being able to simply plug in their lights without having to fit a suitable plug themselves.

Wiring and cable types

The type of cable used for the wiring of Christmas lights varied over the years, evolving as new materials came into use and regulations changed.

Older, big-bulbed sets of lights in production up to the 1960s used relatively thick wires insulated with rubber, cloth, or a combination of both. Typically sets were wired with a single loop of cable starting at the plug, passing through each lampholder in turn, then returning back to the plug.

From the 1960s, light sets started moving over to more modern and lighter weight PVC-insulated wiring. This was normally single insulated, where the current-carrying metal core of the wire was coated in just one layer of plastic. Most sets were arranged with lampholders along a single twisted pair of such wires, with the outer insulation being green, white or silver. A translucent green plastic was particularly common and used by manufacturers including Pifco and Swan, although Noma sometimes used an opaque dark green.

By the end of the 1980s, the use of such lightweight wiring for mains-powered electrical items was being phased out due to safety concerns: the single layer of insulation was vulnerable to damage and it was relatively easy for the live inner cable to become exposed causing a risk of electric shock.

Newer light sets produced from 1991 onwards use much more robust double insulated cable. This has two layers of insulation for extra safety, with light sets typically using opaque dark green wiring.

Double-insulated light sets are safer and more hardwearing, but the heavier cable is a little clumsier. The higher cost of producing such cable also led to several manufacturers modifying sets to use less cable. Most manufacturers reduced the spacing between lights to decrease the amount of wiring used. Others went further and replaced straight-line twisted pair wiring with a single double insulated loop of wire which, by being connected to the plug at both ends, makes such light sets harder to arrange on a tree or around a room.

Sets of lights operated via a low voltage transformer (typically flashing, chasing or outdoor sets) or from batteries continued to use thin, single-insulated cable as the lower voltages involved meant that damaged cabling did not present a shock risk in the same way as on mains-operated sets.

 

« Christmas Lights Index